Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Adblue Oil Level of the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: AdBlue warning light

In this video, you will learn how to check the Adblue oil level of the BMW X1. First, start the engine by pressing the Start button. Now, look at the central dashboard located between the two seats behind the gear shift and press the menu button. On the onboard computer, find the 'Vehicle Status' function and press the oil cup symbol plus the two following buttons. At this point, three items will appear on the screen: Adblue, Range, and Refill. From these three parameters, you can monitor the oil level and the miles driven since the last change.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2009-2015 / E84) You can replace the battery installed in the BMW X1 by opening the rear hatch to access the trunk area. Here, you will need to detach the carpet at t…
How to Reset Tire Pressure on the BMW X1
How to Reset Tire Pressure on the BMW X1
BMW X1 (2015-2022 / F48) To reset the tire pressure on the BMW X1, first check the pressure of all 4 tires. Once you have checked the tire pressures, get inside the vehicle, …
Where to Find the Fuse Box of the BMW X1
BMW X1 (2009-2015 / E84) To locate the fuse box of your first-generation BMW X1 (2009-2015), carefully read this mini guide and follow the steps outlined. First, turn off the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos