Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X1
    4. : How to top up BMW X1 antifreeze fluid

BMW X1 - Video tutorial

Model: BMW X1 F48 - Years 2015-2022
Part: Antifreeze liquid
Operation: How to top up BMW X1 antifreeze fluid

The coolant cap is located near the radiator. Next to it there is also the filling tray with the appropriate "min-max" scale. To top up, just unscrew the cap and insert the liquid. Remember that this small maintenance must not be carried out frequently: this means that, if you often have to top up the coolant, it means that there is certainly some problem in the circuit, probably a leak in some piping. We also inform you that there are liquids of various colors, by convention: choose the color corresponding to the liquid you already have in the circuit.


Posted on 24 February 2024 by ScegliAuto



How to restore the brake fluid service light on a BMW X1.
BMW X1 (2015-2022 / F48) In this video, we see how to reset the brake fluid indicator on a BMW X1 F48 version after replacing it. So, with the mouse on the central console, w
Where is the brake fluid reservoir located in the 2018 BMW X1?
BMW X1 (2015-2022 / F48) The brake fluid reservoir of the 2018 BMW X1 is located inside the engine compartment. To view the reservoir, you need to first remove the rubber gas
Where is the brake fluid reservoir located on the BMW X1?
BMW X1 (2015-2022 / F48) In this video, we see where the brake fluid reservoir is located on a BMW X1. Unfortunately, it is in a really inconvenient position. We have to open

    Frequently Asked Questions

    • X1 2015-2022 - Where is the BMW X1 coolant reservoir located? Read Answer
    • X1 2015-2022 - Where should the coolant / antifreeze go on a BMW X1? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos