Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Warning Lights on BMW 3 Series Instrument Cluster

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

In this video tutorial, you will see instructions to reset the warning lights that illuminate on the instrument cluster of a BMW 3 Series (which can include the service light or the TPMS light). First, get inside the vehicle and turn on the ignition: then press the button on the instrument cluster along with the central button on the turn signal stalk, as shown in the video; hold it for about ten seconds and navigate through the menu to perform the various resets. At this point, turn the ignition off and check that your warning lights have reset correctly.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting BMW 3 Series Warning Light
Resetting BMW 3 Series Warning Light
BMW Serie 3 (1998-2006 / E46) Let's see what to do when a warning light appears on the instrument panel of the BMW 3 Series. Turn on the vehicle's instrument panel with the igniti…
Reset Check Engine Light on BMW E46
Reset Check Engine Light on BMW E46
BMW Serie 3 (1998-2006 / E46) Let's see how to reset the maintenance service light on a BMW 3 Series. Enter the BMW cabin, turn on the vehicle's instrument cluster with the igniti…
How to Reset the Service Lights on a BMW E46
How to Reset the Service Lights on a BMW E46
BMW Serie 3 (1998-2006 / E46) To reset the service lights on a BMW E46, follow this procedure: turn off the car, once off, press and hold the reset button located to the left of t…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos