Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear cover of the speedometer from the BMW Z3?

Model: BMW Z3 MK 1 - Years 1995-2002
Part: Instrument cluster

In order to replace the rear cover of the BMW Z3, you must first remove the speedometer from inside its housing, unscrewing the special screws and disconnecting the connectors at the rear. Once the speedometer has been removed, it will be possible to unscrew the screws on its back so that the rear cover can be removed. There will also be screws under it that secure the front cover. Therefore, this too can be removed and both parts can be replaced with new spare parts.

Posted on 25 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the dashboard bulbs of a BMW Z3.
How to replace the dashboard bulbs of a BMW Z3.
BMW Z3 (1995-2002 / MK 1) Replacing the indicator light bulb on a BMW Z3 is an extremely simple operation. Today, with the help of this short video tutorial, we will explain h…
How to replace the gear knob of the BMW Z3
How to replace the gear knob of the BMW Z3
BMW Z3 (1995-2002 / MK 1) If you own a BMW Z3 and the gear knob is too worn out, then you have no choice but to replace it with a new one. In the following guide, we will desc…
How to remove the rear window of the soft top on the BMW Z3
How to remove the rear window of the soft top on the BMW Z3
BMW Z3 (1995-2002 / MK 1) In this video tutorial we will see how to remove and replace the plastic rear window of the soft top on the BMW Z3, following these simple steps. Fir…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos