Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote control battery of the BMW 2 Series f22

Model: BMW Serie 2 F45 - Years 2014-2021
Part: Key

The guide shows how to replace the remote control battery of BMW 2 Series f22 keys. The first operation to perform is to extract the physical key from the remote control by pressing the hold button on the back of the remote control. Using a slotted screwdriver with a very small tip, pry the retaining clip on the rear panel of the remote control. Remove the old battery and replace it with a new CR2045. Refit the rear cover and the emergency key. Check that the remote control works correctly before taking the road.

Posted on 31 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the BMW 2 Series F22
How to replace the front headlight bulb of the BMW 2 Series F22
BMW Serie 2 (2013-2021 / F22) When one of the bulbs in the front headlight of your BMW 2 Series f22 stops working suddenly, it is not necessary to go to a local workshop to replac…
How to change the battery of a BMW Series 2 remote control.
How to change the battery of a BMW Series 2 remote control.
BMW Serie 2 (2014-2021 / F45) Today we can see, thanks to this very useful video tutorial, the entire procedure necessary to replace the battery of a BMW Series 2 remote control. …
Bmw 2 Series remote control battery replacement
Bmw 2 Series remote control battery replacement
BMW Serie 2 (2014-2021 / F45) Today we will see, in this short and simple video tutorial, how to disassemble and replace the battery of the remote control of the key of a BMW 2 Se…

Other guides you may be interested in

How to Replace the Gear Shift Gaiter of the Honda CR-V

You can purchase an aftermarket gear shift cover complete with a knob, made of leather with coloured stitching. The disassembly is quite straightforward: start by unscrewing the gear shift knob by twisting it. Next, detach the trim at the base of the gear lever by prying along the edges. Then, remove the chrome trim that holds the gaiter in place, peeling off the leather edges from the plastic support. Apply new double-sided adhesive to the plastic tabs to insert and stick the edges of the new gaiter, securing it with the chrome trim. Finally, fit the gaiter complete with the knob onto the gear lever, securing it with the appropriate screws and reattaching the trim to the tunnel support.

Watch the video!


by ScegliAuto

More videos