Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery of a BMW 2 Series

Model: BMW Serie 2 F45 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

Today, we will see, thanks to this useful video tutorial, the entire procedure necessary to replace the battery in the remote of a BMW 2 Series. Start by extracting the physical emergency key as shown in the video.

Next, insert the tip of the extracted key into a designated slot located on the top of the remote, and pry off the back cover to remove it. Once this is done, remove the old battery and replace it with a new one. Finally, close the remote by following the reverse procedure.

The required battery is the CR2022.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to replace the battery of the BMW 2 Series Gran Tourer
How to replace the battery of the BMW 2 Series Gran Tourer
BMW Serie 2 (2014-2021 / F45) The following instructions will allow us to disassemble and replace the battery of the BMW 2 Series Gran Tourer. First, we open the hood of the car a…
BMW 2 Series Battery Replacement
BMW 2 Series Battery Replacement
BMW Serie 2 (2014-2021 / F45) Replacing the battery in your BMW 2 Series? Let's go through the battery replacement in the engine compartment. You will find the battery in the engi…
How to disassemble and replace the battery of the BMW 2 Series 228i.
How to disassemble and replace the battery of the BMW 2 Series 228i.
BMW Serie 2 (2019-2026 / F44) The information provided in this guide will show us how to disassemble and replace the battery of the BMW Series 2 228i. First, we open the hood of t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos