Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Water Spots from Your Car

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

As we all know, after a rainy day, the body of your car will be covered in small dirt spots formed by raindrops. To remove water spots, especially from glass surfaces, use specific products designed to eliminate this annoying dirt. First, pour some specific soap onto a soft cloth and start rubbing it on the affected glass area. You will see the spots disappear, but a dull film will remain on the glass due to the soap's consistency. At this point, spray a glass cleaner onto another clean soft cloth and wipe it down. The dull haze will vanish, and the glass will shine like new.

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove Water Spots from the Bodywork
How to Remove Water Spots from the Bodywork
BMW Serie 3 (2005-2013 / E91, E90, E92) Water spots form on the surface of your car after it gets wet and doesn't dry immediately, leaving a residue that looks like spots. You can use acid,…
How do you replace the rear brake pads of the BMW 3 Series?
How do you replace the rear brake pads of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In order to replace the rear brake pads of the BMW 3 Series, first you will need to lift the car to ensure that the corresponding wheel is removed fr…
How to Replace the Front Brake Pads on a BMW 3 Series
How to Replace the Front Brake Pads on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) To replace the front brake pads on a BMW 3 Series, first lift the vehicle to remove the wheel. The wheel can be taken off after loosening its mountin…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos