Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the BMW 1 Series?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Antifreeze coolant

See other generations:
Video tutorial

To replace the coolant in the BMW 1 Series, lift the car using a jack and remove the screws securing the protective panel under the vehicle, near the engine compartment. Once the panel is removed, open the bonnet and unscrew the coolant cap to allow the fluid to drain completely from the drain plug.

This is located at the bottom of the car and can be opened while collecting all the fluid in a container. Finally, close the cap, secure the panel, and top up the fluid from the cap accessible in the engine compartment.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Fluid on a BMW 1 Series
How to Replace the Radiator Fluid on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Do you want to replace the coolant? Here’s how to top up the fluid on a 1 Series. Pull the plastic lever located at the bottom left of the dashboard,…
How to Replace the Coolant in a BMW 1 Series
How to Replace the Coolant in a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide outlines the steps to bleed and replace the coolant in a BMW 1 Series. First, lift the vehicle and disconnect the coolant hose by loosenin…
How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos