Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

Do you want to replace the coolant? Here’s how to top up the fluid on a 1 Series. Pull the plastic lever located at the bottom left of the dashboard, lift the bonnet, and secure it with the metal prop if available.

Next, locate the cap for the windscreen washer fluid reservoir (remove the cap). Using a funnel, top up the washer fluid and replace the reservoir cap. Close the bonnet after maintenance. Replace the coolant if it is too full of debris and rust.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in the BMW 1 Series?
How to Replace the Coolant in the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To replace the coolant in the BMW 1 Series, lift the car using a jack and remove the screws securing the protective panel under the vehicle, near the…
How to Replace the Coolant in a BMW 1 Series
How to Replace the Coolant in a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide outlines the steps to bleed and replace the coolant in a BMW 1 Series. First, lift the vehicle and disconnect the coolant hose by loosenin…
How to Change Engine Oil and Filter on a BMW 1 Series
How to Change Engine Oil and Filter on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To change the engine oil and filter on a BMW 1 Series, open the car door and pull up the engine compartment release lever located at the bottom left …

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos