Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Cover Gasket Replacement

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Valve

This video shows how to replace the valve cover gaskets. First, with the engine cold, remove the engine cover plastics by unscrewing the support nuts located under the "buttons" of the plastics. Locate the ignition coils and remove them to access the plugs by disconnecting the wiring. Once done, you can remove the upper plastic cover on the wiring harness over the intake manifold and the valve cover. After removing the valve cover, take out and replace the rubber grommets, clean the seating area of the valve cover, and position the new gasket.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change and Filter Replacement
Oil Change and Filter Replacement
BMW Serie 5 (1988-1995 / E34) If you own a BMW 5 Series, you can change the oil and replace the filter without going to a mechanic. Loosen and unscrew the bolt that serves as the …
Valve Cover Gasket Failure
Valve Cover Gasket Failure
BMW Serie 5 (1995-2003 / E39) After removing the valve cover, you will notice that the damage to the gasket has caused lubricant to leak onto the cylinder head. This type of damag…
Replace Intake Manifold Gasket
Replace Intake Manifold Gasket
BMW Serie 5 (1988-1995 / E34) Before installing the new intake manifold gaskets, it is essential to clean the gasket seats on both the manifold side and the cylinder head. Remove …

Other guides you may be interested in

How to Replace the Trunk Handle on an Audi A4

The first step, after lifting the hood, is to remove the panel covering the inside of the trunk. Once removed, you can access the entire handle mechanism. Now, disconnect the connector that powers the trunk. This will allow you to disengage the various mechanisms that operate the handle. Next, remove all the cables that move the parts. After that, unscrew all the bolts securing the handle from the inside and follow this procedure for removing the outer part as well.

Watch the video!


by ScegliAuto

More videos