Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting Tensioner Rollers

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Timing belt

The timing kit of a car consists of a belt and a tensioner roller. The timing belt must be replaced because its malfunction can cause serious engine damage. In the following guide, we will look at the tensioner rollers. Timing tensioner rollers can have various systems for adjusting tension. The tensioners can also be adjusted manually. Turn the adjustment bolt on one side counterclockwise until the accessory belt is loose enough to remove. Then tighten the tensioner pulley by turning it clockwise until the belt is tight.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Serpentine Belt
Replacing the Serpentine Belt
BMW Serie 5 (1995-2003 / E39) The car model in question is equipped with two auxiliary belts, each with its own tensioner: when replacing these belts, it is always advisable to al…
Removing the Auxiliary Belt Tensioner
Removing the Auxiliary Belt Tensioner
BMW Serie 5 (1995-2003 / E39) The auxiliary belt tensioner is located just behind the crankshaft pulley: to remove it, first loosen the tensioner to release the belt and the vario…
How to Replace the Timing Chain Tensioner on a BMW 5 Series?
How to Replace the Timing Chain Tensioner on a BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) To replace the timing chain tensioner on a BMW 5 Series, open the hood to access the components inside the engine compartment. The tensioner is locat…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos