Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the BMW 3 Series Heating Radiator

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Heater core

This guide explains how to remove and replace the cabin heating radiator of the BMW 3 Series E46. First, get inside the vehicle and start by removing the shift knob and the side cover; then unscrew the screws of the glove box to remove it, disconnecting the various electrical connectors underneath. Next, remove the radio and the climate control buttons; then unscrew the screws underneath to access the heating radiator, disconnecting the various hoses to remove and replace the radiator!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Core in a BMW 3 Series
How to Replace the Heater Core in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) To replace the heater core in a BMW 3 Series, you need to completely disassemble the dashboard: start by loosening the screws that secure the covers …
How to Replace the Heater Core in a BMW 3 Series
How to Replace the Heater Core in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Discover the main steps to remove and replace the heater core in the BMW 3 Series cabin by following the instructions below. First, get inside the ve…
How to Remove the Heat Exchanger from the BMW 3 Series
How to Remove the Heat Exchanger from the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove and replace the heater core or heat exchanger of the BMW 3 Series. First, get inside the vehi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos