Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Key Reminder When Opening the Door

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Onboard computer

Nowadays, almost all cars come standard with various safety devices. Among these, some emit audible alerts as soon as the driver opens the door while leaving the lights on or the ignition keys in the ignition switch. In everyday life, however, it happens that you need to stop the car without getting out but still need to open the door, even if just for a brief moment. Immediately, the audible alert sounds, which you can temporarily disable simply by removing the keys and reinserting them into the ignition switch, allowing you to keep the door open without being disturbed by the alert sound.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Door Handle and Panel for LED Installation
Removing Door Handle and Panel for LED Installation
BMW Serie 5 (1995-2003 / E39) To remove the door panel, first take out the screw located inside the inner opening handle and release the snap clips along the edges: to finally rem…
Removing the Radio Frame with Protective Door
Removing the Radio Frame with Protective Door
BMW Serie 5 (1995-2003 / E39) In this guide, you will remove the protective door that may cause issues with opening or closing. Once you fully lower the glove compartment, remove …
Remove outside handle on BMW 5
Remove outside handle on BMW 5
BMW Serie 5 (2003-2010 / E60, E61) Is the door handle damaged? Let's see the disassembly of the handle inside the BMW 5 door. We open the door, identify the hole above the side of the …

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos