Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Stock Radio with an Android Unit in the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In today's tutorial video, you will see the main steps to remove and replace the stock radio with an Android unit in the BMW 3 Series. First, get inside the vehicle and start by removing the original radio; to do this, detach it from the sides by unscrewing the screws located under the climate control buttons, and disconnect the electrical cables found on the back, as shown in the video.

At this point, install the new radio with the Android system; make the necessary wiring modifications and then reassemble everything!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to dismantle the car radio of the BMW Series 3.
How to dismantle the car radio of the BMW Series 3.
BMW Serie 3 (2005-2013 / E92, E90, E91) The instructions provided in this guide will allow us to remove and replace the stock radio of the BMW 3 Series. First, we get inside the vehicle and…
How to Reset the Onboard Computer of the BMW 3 Series?
How to Reset the Onboard Computer of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To reset the onboard computer of the BMW 3 Series, turn the key to the "on" position to activate the instrument cluster, allowing you to use the radi…
How to Remove the BMW 3 Series Radio
How to Remove the BMW 3 Series Radio
BMW Serie 3 (2012-2019 / F31, F30) Today, let's go through the step-by-step instructions on how to remove and replace the factory radio of the BMW 3 Series in simple and quick steps. F…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos