Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Car stereo

Today let's see the step-by-step instructions on how to disassemble and replace the standard car radio of the BMW 3 Series, in simple and quick steps. First of all, we get on board the passenger compartment and start removing the central plastic cover of the dashboard and the air vents, disconnecting the electrical connector found on the back; then we unscrew the fixing screws of the car radio and disconnect all the wiring to remove it, as shown in the video. At this point, if necessary, we replace the car radio with the new one, reassembling everything and checking its operation, following the video until the end!

Posted on 29 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Display in a BMW 3 Series?
How to Remove the Display in a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial, you will see how to remove the display in a BMW 3 Series F30, a very simple operation. Start by disconnecting the negative terminal…
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses of the BMW 3 Series are located inside two fuse boxes installed in the vehicle: the first is situated inside the cabin, immediately behind …
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos