Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the car radio of the BMW Series 3.

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

The instructions provided in this guide will allow us to remove and replace the stock radio of the BMW 3 Series. First, we get inside the vehicle and start by removing the climate control panel, prying it off from the sides and disconnecting the wiring located at the back; then we proceed to remove the radio as well, disconnecting the electrical connectors situated at the rear, as shown in the video.

At this point, we carry out the repair or replacement of the radio, reinstalling it onto the dashboard and making the necessary connections; we then check the operation of the radio.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

How to remove the original radio of the BMW 3 Series
How to remove the original radio of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's step-by-step instructions will show us how to disassemble and replace the stock radio of the BMW 3 Series. First, we get into the car and sta…
How to Remove the BMW 3 Series Radio
How to Remove the BMW 3 Series Radio
BMW Serie 3 (2012-2019 / F31, F30) Today, let's go through the step-by-step instructions on how to remove and replace the factory radio of the BMW 3 Series in simple and quick steps. F…
Replacing the Stock Radio with an Android Unit in the BMW 3 Series
Replacing the Stock Radio with an Android Unit in the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In today's tutorial video, you will see the main steps to remove and replace the stock radio with an Android unit in the BMW 3 Series. First, get ins…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos