Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : What is the fuse scheme and where is the fuse box of a BMW X5 located?

BMW X5 - Video tutorial

Model: BMW X5 E53 - Years 1999-2006
Part: Fuse box
Operation: What is the fuse scheme and where is the fuse box of a BMW X5 located?

The exact layout and positioning of the fuses of our BMW X5 is shown in the video attached to this description. Fuses are used to prevent damage to the vehicle's electrical components by breaking the circuit in the event of a current overload or short circuit. The fuses are grouped in the fuse box, which is located inside the glove box. To reach it, we will have to open the door of the glove compartment, and then unhook the fixing clips of the fuse box cover. At this point we will have to remove the cover itself, and we will have reached the fuses.


Posted on 11 April 2024 by ScegliAuto



What is the fuse scheme of a BMW X5?
BMW X5 (2007-2013 / E70) In the video in this article, the exact positioning scheme of all the fuses in the fuse box of a BMW X5 is shown. To reach the fuse box we will have
Where is the fuse box located in the BMW X5 GO5?
BMW X5 (2019-2024 / G18, G05) The fuse box of the BMW X5 produced from 2018 to 2022 features a fuse box located inside the cabin on the right and left side under the dashboard. Th
What is the fuse layout of the BMW X5?
BMW X5 (2013-2018 / F15) If some devices in our BMW X5 have suddenly stopped working, we can first check the status of the corresponding fuses, the diagrams of which are indi

    Frequently Asked Questions

    • X5 2007-2013 - Where are the fuses located on the BMW X5 E70? Read Answer
    • X5 2007-2013 - Where is the suspension fuse on the BMW X5 located? Read Answer
    • X5 2007-2013 - How much does it cost to replace the fuse on a BMW X5? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos