Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight

Today, you will see in this video tutorial how to remove and replace the front headlight of the BMW 3 Series by following these simple and quick steps. First, lift the vehicle and remove the front wheel; then, unscrew the screws located on both sides of the front wheel well, as well as the additional screws located above and below the bumper, as shown in the video. At this point, unscrew the screws of the headlight assembly, disconnecting the electrical connector found at the back; now you can completely remove the headlight by following the video tutorial to the end!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Front Headlight Bulb on BMW 3
Remove Front Headlight Bulb on BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the front headlight bulb from a BMW 3? Let's go through the process of removing the damaged bulb. Open the hood and lift it. Locate the headli…
How to Replace the Headlight Lens on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today's guide illustrates how to remove and replace the headlight lens on the BMW 3 Series, following these simple steps. First, open the hood and be…
Replacing the Headlight Bulb on a BMW 3 Series
Replacing the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will see in this brief and simple guide the steps to remove and replace the headlight bulb on a BMW 3 Series. First, open the hood of your…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos