Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heat Exchanger of the BMW 3 Series?

Model: BMW Serie 3 E30 - Years 1982-1992
Part: Heater core

To replace the heat exchanger of the BMW 3 Series, access the components located inside the cabin. Specifically, you will need to loosen the bolts that secure the side panel in the footwell on the driver's side. Once this panel is removed, you can access the hoses connected to the cabin heater radiator: after disconnecting these hoses, you can pull out the radiator after loosening its mounting screws. Once it is removed, you can install a new one, reassembling all the other parts that were previously removed.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Heat Exchanger from the BMW 3 Series
How to Remove the Heat Exchanger from the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove and replace the heater core or heat exchanger of the BMW 3 Series. First, get inside the vehi…
How to Replace the Heater Core in a BMW 3 Series
How to Replace the Heater Core in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Discover the main steps to remove and replace the heater core in the BMW 3 Series cabin by following the instructions below. First, get inside the ve…
How to Remove the Heater Core from a BMW 3 Series
How to Remove the Heater Core from a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, let's go over the main instructions for removing and replacing the cabin heater core in a BMW 3 Series. First, get inside the vehicle and star…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos