Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the BMW 320d

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

The battery is located in the rear hood of the BMW 3 Series: prepare the necessary materials (6-10 mm socket wrench); start the procedure by opening the trunk hood (make sure it is securely held). You can find the battery on the right side of the cover; lift the inner cover; remove the polystyrene cover from the battery, at this point you will find the spare tire which must also be removed from its place.

Once you find the battery, release the pressure clips of the plastic battery compartment cover; remove the battery connectors by unscrewing the terminal screws (positive and negative). Never connect the two opposite terminals.

Install the new functioning battery by reversing the steps. Start the vehicle and set the time and date.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace Glow Plugs in a BMW 3 Series 320d?
How to Replace Glow Plugs in a BMW 3 Series 320d?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, see how to replace the glow plugs in a BMW 3 Series E90 320d, a very simple and quick operation. First, disconnect the negative termin…
Disassembly of the starter motor of the BMW 3 Series 320D.
Disassembly of the starter motor of the BMW 3 Series 320D.
BMW Serie 3 (1998-2006 / E46) Today we will discover the main instructions that will allow us to disassemble and replace the starter motor of the BMW 3 Series 320D. First of all, …
Where to Find the Fuse Box of the BMW 320D
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow the steps described below to locate the fuse box inside your BMW 320d in just a few minutes and safely. First, ensure the car is completely of…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos