Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front drive shaft boot on the Bmw 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: CV boot

Today we will see, in this video tutorial, how to disassemble and replace the front axle shaft boot on the Bmw 3 Series E46, following the instructions below. First we lift the car and start by removing the front wheel; after which we remove the front brake caliper, unscrewing the two bolts, and disconnect the head of the arm from the braking system, as shown in the video. At this point we remove the central bearing bolt and then proceed with the extraction of the front axle shaft, then removing the boot; we just have to replace it with the new one!

Posted on 22 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Cabin filter replacement on BMW 3 Series
Cabin filter replacement on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Replacing the pollen filter on BMW 3 Series E46 is really very simple, and today we show you how. The first thing to know is that on this model of ca…
Replacement of the grille on BMW E46
Replacement of the grille on BMW E46
BMW Serie 3 (1998-2006 / E46) Do we want to remove the front grille located in the front hood of the BMW E46? Let's see how the bonnet can be removed from above. We lift the front…
BMW 3 Series E46 fuse diagram
BMW 3 Series E46 fuse diagram
BMW Serie 3 (1998-2006 / E46) In today's video we will see the schematic and fuse diagram on a BMW 3 Series E46, following the instructions below. Let's go then to identify the in…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on BMW 1 Series

What to do when a warning light appears on the instrument cluster? Here's how to reset the tyre pressure light on a 1 Series. Turn on the instrument cluster, use the buttons on the lever to the left of the steering wheel, then, once in the settings menu, scroll with the up/down button until you find the "Reset Tyres" option, select it using the end of the lever as shown in the video to turn off the tyre pressure warning light and exit the settings menu. Check the instrument cluster by turning it off and back on with the ignition key. Repeat the same procedure for other settings.

Watch the video!


by ScegliAuto

More videos