Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : How to replace the glass and the trim panel of the exterior mirror on the BMW 1 Series f20

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 F21, MK 2, F20 - Years 2011-2019
Part: Outside rearview mirror
Operation: How to replace the glass and the trim panel of the exterior mirror on the BMW 1 Series f20

The guide shows how to perform the replacement of the mirror and the door mirror cover of the BMW 1 Series f20. The first operation to perform is to position the mirror that points to the top and to the upper external corner. At this point, with a lever for plastics, force the lower corner of the mirror to disassemble the clips. Disconnect the electrical cables and remove the glass. Remove the three clips securing the mirror trim panel in order to remove it from its seat. After installing the new glass and the new finishing cover, check the correct functioning of the mirror.


Posted on 31 May 2024 by ScegliAuto



How to replace the exterior mirror on the BMW 1 Series F20
BMW Serie 1 (2011-2019 / F21, MK 2, F20) Let's find out in this video the procedure necessary to remove and replace the external rearview mirror on the BMW 1 Series F20, but also on the 2 Se
How to replace the arrow on the exterior mirror on a BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) Before we can start, we will have to get out of the cockpit of our BMW 1 Series, and then head towards the outside rearview mirror. So let's start by
How do you replace the bulb of the BMW Series 1 mirror?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In order to replace the bulb of the BMW 1 Series side mirror, you need to use an object to pry and extract the mirror glass from its housing. Once th

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos