Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a BMW 3 Series E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

If you own a BMW 3 Series E46 and want to manually reset the service light, just carefully follow the instructions below. In a few seconds, you will complete the entire procedure without any issues.

First, get inside the car and ensure it is completely off. Then locate the button on the left side of the dashboard, between the fuel gauge and the speedometer, and hold it down. At the same time, insert the key and turn on the ignition.

As soon as the word "reset" appears on the mini display, release the button and press it down again until the display starts to flash. Finally, press the button one last time and you are done.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) After performing the service or oil change on your BMW 3 Series E46, you need to manually reset the maintenance light. Here are the steps you need to…
BMW Serie 3 (1998-2006 / E46) Resetting the service light on a BMW 3 Series E46 is very simple, and now you will learn how to do it. Insert the ignition key without turning it, th…
BMW Serie 3 (1998-2006 / E46) To reset the Service light on the instrument cluster of the BMW 3 Series E46, turn on the ignition and press and hold the button located to the left …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Serie 3 2012-2019 - What do the red and yellow oil warning lights mean in the BMW 3 series? Read answer

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos