Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Tunnel in a BMW 1 Series?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Center console tunnel

See other generations:
Video tutorial

This tutorial shows how to remove the centre tunnel in the BMW 1 Series E87, a very simple operation. It is recommended to use a plastic spatula to avoid causing any damage.

First, remove the two indicated pins, then unclip the lower frame of the climate control module and remove the rear cover of the tunnel. Once this is done, unscrew the three indicated bolts, extract the cigarette lighter socket, detach the gaiter from the knob, and unscrew the last remaining screws, one on the side and two in the gear lever compartment.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Reset Service on BMW 1 Series
Reset Service on BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) How to reset the maintenance light on a BMW 1 Series? First, turn on the instrument cluster with the key or button. Press the button located above th…
How to Remove the Trim and Air Vents in a BMW 3 Series
How to Remove the Trim and Air Vents in a BMW 3 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this video, see how to remove the trim and air vents and how to take off the rear cover of the central tunnel in a BMW 3 Series. Use a plastic lev…
How to reset the tire pressure light on a BMW 1 Series?
How to reset the tire pressure light on a BMW 1 Series?
BMW Serie 1 (2019-2026 / MK 3, F40) To reset the tire pressure warning light on a BMW 1 Series, turn on the instrument panel without starting the engine. Use the rotary controller locat…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos