Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Trim and Air Vents in a BMW 3 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Battery

In this video, see how to remove the trim and air vents and how to take off the rear cover of the central tunnel in a BMW 3 Series. Use a plastic lever to pry at the edge of the side dashboard to remove the plastic trim with the air vent. Detach the vent located to the right of the dashboard using the lever. Remove the grille located in the compartment of the previously removed trim. Fit the new air vents onto the trim pieces, then proceed with the rest of the assembly in reverse order.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Screen on a BMW 1 Series
How to Install the Screen on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this video, we will see how to install the 8.8" screen on a BMW 1 Series. The part with the air conditioning vents can be removed gently; disconne…
How to Remove the Display from a BMW 1 Series?
How to Remove the Display from a BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this video tutorial, you can see how to remove the central display from a BMW 1 Series. For this operation, you will need a suitable tool for remo…
How to defrost the windshield of the BMW Series 1.
How to defrost the windshield of the BMW Series 1.
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Below we will see the main instructions on how to defrost the windshield of the BMW Series 1, but generally applicable to all vehicles equipped with …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos