Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the trunk with low battery of the BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013

In this video tutorial we will see how to open the trunk in case of need, having a flat battery, of the BMW 3 Series E90, following these simple steps. First we take the remote control in hand and start by removing the physical key from inside it; then we go to insert the key inside the lock of the tailgate of the trunk. At this point we turn the key to manually open our tailgate, as shown in the video. At this point, let's proceed with replacing the car battery or the key remote control battery!

Posted on 5 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open the trunk lid with low battery on BMW 3 Series
How to open the trunk lid with low battery on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In this video tutorial we will see a simple solution to be able to open the tailgate with a flat battery, and therefore without a remote control, on …
How do you replace the battery in the BMW 3 Series?
How do you replace the battery in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In order to replace the battery of the BMW 3 Series, you need to open the tailgate, so that you have access to the components that are inside the boo…
How do you replace the battery in the BMW E90 Series?
How do you replace the battery in the BMW E90 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) If there were any doubts about replacing the power battery of the BMW 3 Series e90, the video attached here is certainly an excellent guide to dispel…

Other guides you may be interested in

How to Remove the Interior Handle of a BMW 3 Series

Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover). Remove the remaining screws on the door panel and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Remove the handle from the panel (remove the retaining screws) and reassemble everything.

Watch the video!


by ScegliAuto

More videos