Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery in the BMW E90 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Battery

If there were any doubts about replacing the power battery of the BMW 3 Series e90, the video attached here is certainly an excellent guide to dispel them all. This car does not have the battery housed in the engine compartment, as is usually the case, but in the rear trunk, on the right side. In fact, you can see a carved panel, which when removed gives us access to the aforementioned battery. First, we remove the locking bracket, then disconnect the negative pole, then the positive one, grab it by its handle and pull it away, making room for the new one.

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the BMW E90 Remote Key Battery
How to Replace the BMW E90 Remote Key Battery
BMW Serie 3 (2005-2013 / E91, E90, E92) Replacing the battery (model CR2032) of the remote key for the BMW 3 Series E90 (this is done the same way on many other BMW models) is extremely sim…
How to change the battery of the BMW Series 3 E90 key.
How to change the battery of the BMW Series 3 E90 key.
BMW Serie 3 (2005-2013 / E91, E90, E92) If the key for your BMW Series 3 E90 is no longer working due to a dead battery, you can follow the procedure below to quickly and safely replace the…
How do you deactivate the passenger side airbag in the BMW Series 3 E90?
How do you deactivate the passenger side airbag in the BMW Series 3 E90?
BMW Serie 3 (2005-2013 / E91, E90, E92) The car mentioned in the subject and visible in the video review here is indeed a BMW Series 3 E90, which we will explore how to deactivate the passe…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos