Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
MK 1, E87, E81, E82
- Years 2004-2013 In today's video tutorial we will see how to remove and replace the exterior rearview mirror of the Bmw 1 Series E87, first generation. First we open the front door and start by removing the triangular plastic cover that we find behind the mirror, by releasing the door panel from the top; after which we go to disconnect the electrical connector, and then use a torx screwdriver to unscrew the screws, as shown in the video. At this point we can remove the rear-view mirror from the outside, applying the reverse procedure for reassembly!
Posted on 12 July 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |