Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the seat belt on the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Checks and maintenance

In order to replace the seat belt on the BMW 3 Series, the plastic covers of the door pillars must be removed, both at the top and at the bottom. Under the top cover, there will be the screw that secures the upper belt pin, which can be loosened. At this point, by removing the covers of the lower part, it will be possible to unscrew the bolts that secure the reel, so that the belt is completely released and replaced with a new spare part. After replacement, all parts will need to be reassembled.

Posted on 21 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the rear seat belt of the BMW 3 Series
Guide to replacing the rear seat belt of the BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below we will see the main instructions on how to disassemble and replace the rear seat belt of the BMW 3 Series. First, we open the rear doors of th…
How to Remove the Seatbelt from a BMW 3 Series
How to Remove the Seatbelt from a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, see how to remove the seatbelt along with the retractor from a BMW 3 Series. Gather various levers, screwdrivers, and wrenches or sock…
Remove the A-Pillar Trim on BMW 3 Series
Remove the A-Pillar Trim on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this video, see how to remove the front and rear trim and the seat belt retractor on a BMW 3 Series. Gather various trim tools, screwdrivers, and …

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos