Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
G20
- Years 2019-2024 The reset of the maintenance warning light in the BMW 3 Series G20 is done through this procedure: 1) press the engine start button three times; 2) as soon as the "diagnostic mode activate" message appears, press the DC button located at the end of the stalk which activates the direction indicators; 3) release the button when the message "engine oil reset possible" appears on the display; 4) keep the BC key pressed again until the machine asks us if we want to reset; 5) confirm by pressing the button again. We have reset the maintenance light!
Posted on 1 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |