Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator of the BMW 3 Series G20 2019

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Service warning light

If you want to carry out the manual reset procedure of the service indicator light of your BMW 3 Series G20 (2019), then all you have to do is read the following guide and apply what is described. First, reach the driver's seat in the vehicle and then insert the key and press the ignition button three times in a row to start the instrument panel in diagnostic mode. Then, press and hold the "BC" button located at the end of the left steering wheel lever for about 20 seconds, and finally confirm the reset of the service indicator light.

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light in the BMW 3 Series G20?
How to Reset the Maintenance Light in the BMW 3 Series G20?
BMW Serie 3 (2019-2026 / G20) Resetting the maintenance light in the BMW 3 Series G20 is done through this procedure: 1) press the engine start button three times; 2) as soon as t…
How to Reset the Tire Light on a 2022 BMW 3 Series G20
How to Reset the Tire Light on a 2022 BMW 3 Series G20
BMW Serie 3 (2019-2026 / G20) In this new mini guide for all of you who own a 2022 BMW 3 Series G20, we will discover how to reset the tire light without the help of a professiona…
How to reset the engine oil indicator on the BMW 3 Series G20 2021
How to reset the engine oil indicator on the BMW 3 Series G20 2021
BMW Serie 3 (2019-2026 / G20) In this new guide of ours, we will discover the necessary steps to correctly complete the manual reset of the engine oil light on the instrument pane…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos