Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Dashboard

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Dashboard

Removing the central dashboard panel is not very difficult if you have good manual skills and patience. Once you have removed the car radio in front of you, the cigarette lighter, and the knobs that control the air by pulling towards yourself, without too much force as they are under pressure. After unscrewing the screw, the central plastic piece will be freed and should be removed carefully, paying attention to the two tabs that hold it in place. Gently pull the panel towards yourself to detach it, being careful not to break the plastic clips that support the springs. The dashboard will then be completely removed.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Your Car's Shocks
How to Replace Your Car's Shocks
BMW Serie 3 (1998-2006 / E46) Shocks are very important for the operation of your car. These components wear out over time and need to be replaced. Doing it yourself can save you …
How to Remove the Instrument Cluster from a BMW 3 Series
How to Remove the Instrument Cluster from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you can begin, sit in the driver's seat of your BMW 3 Series. Using a Torx screwdriver, start by unscrewing the screws that secure the instrum…
How to Remove the Instrument Cluster on BMW 3 Series
How to Remove the Instrument Cluster on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the instrument cluster to replace the LEDs in the BMW 3 Series? Let's carefully see in this video how to proceed with the correct d…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos