Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the BMW X1?

Model: BMW X1 E84 - Years 2009-2015
Part: Fuse box

The fuses in the BMW X1 are all contained within the single fuse box installed in the vehicle: this is located inside the cabin. To access it, open the glove compartment on the passenger side: by releasing the pins inside, you can completely remove the compartment, providing access to the components at the back. Inside this box, you will find the fuses responsible for the operation of the courtesy lights, windshield wipers, horn, ABS, and more.

Updated on 19 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where to Find the Cabin Fuse Box in the BMW X1
Where to Find the Cabin Fuse Box in the BMW X1
BMW X1 (2009-2015 / E84) The BMW X1 series E84 is the first generation of the Bavarian crossover and was introduced in 2008. To access the cabin fuse box, open the glove comp…
Where is the Fuse Box in the BMW X1?
Where is the Fuse Box in the BMW X1?
BMW X1 (2009-2015 / E84) In this video, see where the fuse box is located in the first generation BMW X1 E84. This operation is necessary if you need to replace one or more f…
Where Are the Fuses Located in the BMW X1?
Where Are the Fuses Located in the BMW X1?
BMW X1 (2009-2015 / E84) The fuses in the BMW X1 are divided between two fuse boxes installed in the vehicle: this model has two boxes that contain the fuses. The first is lo…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos