Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs on BMW X3 with LED Replacements

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Headlight bulb

In this tutorial, you will see how to replace the front bulbs on a BMW X3 with LED replacements, which consume less power compared to traditional Xenon bulbs. First, ensure that the key is not inserted. For the passenger side, detach the windshield washer fluid cap and remove the rear cover of the headlight. Next, disconnect the power connector, grasp the old bulb, and extract it from the housing by turning it slightly counterclockwise. Finally, connect the control unit to both the power supply and the replacement bulb, install the latter by following the reverse procedure, and repeat the operation for the opposite side.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlight Bulbs on a BMW X3
How to Remove the Headlight Bulbs on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Let's see how to replace the headlight bulbs on a BMW X3. Open and lift the hood of the engine compartment. Locate the inspection cap of the headligh…
How to Replace the Headlight Bulbs on a BMW X3
How to Replace the Headlight Bulbs on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Do you want to replace the headlight bulbs on a BMW X3? Let's see how to proceed: open the hood by pulling the lever located at the bottom right of t…
Replacing Rear Headlight Bulbs on BMW X3
Replacing Rear Headlight Bulbs on BMW X3
BMW X3 (2003-2010 / MK 1, E83) Are the rear headlight bulbs blown? Don’t worry, let’s see how to replace them on a BMW X3. Open the trunk by pressing the electric button. Locate th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos