Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Steering Wheel Controls Disassembly

Model: BMW X5 E53 - Years 1999-2006
Part: Steering wheel

To disassemble the steering wheel buttons, you must first remove the airbag by working through the two holes at the bottom. There are two hooks that hold the airbag in place, and through the holes, you can reach those hooks. It is also advisable to disconnect the battery to avoid unwanted warning lights or, worse, explosions. The trim pieces are formed on the spokes of the steering wheel by tabs integrated into the trim that are inserted into a rubber housing that keeps them in position. These wires, connected to the trim, are routed just behind the airbag, threaded through the hooks in the steering wheel recess, so just pull them.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Wiper Blade on a BMW X5
Removing the Rear Wiper Blade on a BMW X5
BMW X5 (1999-2006 / E53) Let's remove the rear wiper blade from our BMW X5. Learn how to replace the rear wiper blade. Grab the rear blade with your hands, gently pull it (wi…
Removing Door Panel X5
Removing Door Panel X5
BMW X5 (2007-2013 / E70) Let's see how to remove the cover panel of the door on a BMW X5. Remove the plastic cover above the internal handle using a pry tool: unscrew the fas…
Replacing the Window Switch Panel
Replacing the Window Switch Panel
BMW X5 (1999-2006 / E53) Use a plastic trim tool (or a small flathead screwdriver with the tip wrapped in electrical tape) to release the window switch panel and the external…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos