Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How do you remove the door handle of a BMW 3 Series 350d?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Handle
Operation: How do you remove the door handle of a BMW 3 Series 350d?

The outside door handle of our Bmw is damaged and we want to replace it with a new one? Or do we want to extract it to renew its look with a touch of paint that is different from the original one? Don't panic: disassembling it is very simple and, as we can well understand from the video, it only takes a few minutes and a screwdriver. We open the door and use our tool to remove the fixing screws whose position is shown in the video. Then, we extract the handle by pulling it outwards (firmly but without too much force) and also remove the last remaining screw. That's it!


Posted on 29 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos