Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment from a BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Glove compartment

To remove the glove compartment from the front passenger side of the BMW 3 Series, open the compartment to access the screws that secure it from the inside. Loosen and completely remove the two screws that hold it in place at the top. After removing these two screws, detach the side clips that secure the compartment in its housing. Once these clips are removed, you can fully slide out the compartment, allowing you to insert a new one. The new compartment should be secured with screws at the top and the side clips.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glove Compartment Drawer of the BMW 3 Series E90
How to Replace the Glove Compartment Drawer of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will learn how to remove and replace the glove compartment drawer of the BMW 3 Series E90 in simple steps. First, move to the front passen…
Where to Find and How to Access the Fuses in a BMW 3 Series?
Where to Find and How to Access the Fuses in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses in your BMW 3 Series are located inside the fuse box. The fuse box is behind the glove compartment on the passenger side. To access the fus…
What is the fuse diagram and where is the fuse box located in a BMW 3 Series?
What is the fuse diagram and where is the fuse box located in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) The attached video shows the diagram and location of the fuses in our BMW 3 Series. Fuses are designed to prevent damage to the vehicle's electrical …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos