Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Glove compartment

See other generations:
Video tutorial

To remove the glove compartment of the BMW 3 Series, use a tool as a lever to detach the trim located on the dashboard just above the compartment. Next, open the compartment and loosen the screws found at the top of the area, including those under the trim.

Finally, unscrew the screws located at the bottom of the glove compartment and disconnect the connector in this area, pulling the compartment out of its housing and replacing it with a new part.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box from the BMW 3 Series?
How to Remove the Glove Box from the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the glove box in the BMW 3 Series, open the glove box and remove the internal support using a screwdriver, as shown in the tutorial. Next,…
How to Replace the Fuse Box on a BMW 3 Series?
How to Replace the Fuse Box on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the fuse box on a BMW 3 Series, open the glove compartment located on the passenger side: this will allow you to loosen the screws inside …
How to Remove the Glove Compartment from a BMW 3 Series?
How to Remove the Glove Compartment from a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To remove the glove compartment from the front passenger side of the BMW 3 Series, open the compartment to access the screws that secure it from the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos