Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
Video tutorial

Replacing the interior lights with LED types will give the car a more modern and appealing look. Start with the lights in the ceiling near the rear-view mirror.

Gently detach the cover plate and proceed to replace the bulbs: if it does not light up, rotate it 180 degrees (LEDs have a specific polarity). Continue in the same way with the central ceiling light, then move to the glove compartment and finally to the boot (bulb type T10). For the new bulbs, you can also opt for a kit containing the suitable models and number of bulbs for your car.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Install LED Strips in a BMW
How to Install LED Strips in a BMW
BMW Serie 1 (2011-2019 / F21, MK 2, F20) LED strips inside the cabin allow the vehicle to change its appearance without replacing internal body parts and are also very functional. There are …
How to Change the Front Headlight Bulb on a BMW 1 Series
How to Change the Front Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2019-2026 / MK 3, F40) To change the front headlight bulb on a BMW 1 Series, switch off the vehicle and the lights, then open the bonnet. Locate the rear of the affected he…
Replacing Interior Lights in the BMW 1 Series F20
Replacing Interior Lights in the BMW 1 Series F20
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In this video, we will see how to replace the interior lights in the BMW 1 Series F20/F21. Specifically, we will change the front and rear courtesy l…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos