Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the BMW X5?

Model: BMW X5 G05, G18 - Years 2019-2026
Part: Fuse box

In this video, you can see the fuse diagram for the BMW X5 and the location of the respective fuse boxes, useful in case you need to check the fuse for a malfunctioning device. As shown, the first two boxes are located inside the cabin, both positioned under the dashboard, one on the passenger side and the other on the driver side. The third and final box is located on the right wall of the trunk. Make sure to replace any damaged fuse with a replacement that has equivalent specifications.

Updated on 27 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

What is the Fuse Diagram for a BMW X5?
What is the Fuse Diagram for a BMW X5?
BMW X5 (2007-2013 / E70) The video in this article shows the exact placement diagram of all the fuses in the fuse box of a BMW X5. To access the fuse box, start by opening th…
What is the fuse diagram and where is the fuse box located in a BMW X5?
What is the fuse diagram and where is the fuse box located in a BMW X5?
BMW X5 (1999-2006 / E53) The attached video shows the exact diagram and placement of the fuses in our BMW X5. Fuses prevent damage to the vehicle's electrical components by i…
What is the fuse layout of the BMW X5?
What is the fuse layout of the BMW X5?
BMW X5 (2013-2018 / F15) In this video we can see where the fuse boxes of the BMW X5 are located and what their respective diagrams are, useful in case we need to check the f…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos