Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Speaker

Model: BMW Serie 5 E60, E61 - Years 2003-2010
Part: Speaker

The front speaker is integrated into the door panel. To replace the speaker, you need to remove the panel. Start by removing the plastic cap labeled SRS-AIRBAG, which covers a mounting screw for the panel. Then, remove the other front screw and disengage the pressure clips around the panel's edge to pull it away enough to disconnect the connectors and the lock cable. Once the panel is removed, take off the reinforcement bracket located directly at the speaker's position and proceed with the removal and replacement before reassembling the panel.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Complete Replacement of Factory Speakers
Complete Replacement of Factory Speakers
BMW Serie 5 (1995-2003 / E39) Lower the window of the door and unscrew the screw located in the opening handle area. Unscrew the screw located in the side tunnel. Using a plastic …
Replacing Door Speakers
Replacing Door Speakers
BMW Serie 5 (1995-2003 / E39) Start by removing the handle cover, then unscrew the screw located on the edge of the door at the level of the air vent. Using a plastic spatula, gen…
Instructions for Disassembling the Window Regulator Mechanism
Instructions for Disassembling the Window Regulator Mechanism
BMW Serie 5 (1995-2003 / E39) To disassemble the window regulator system, you need to remove the inner door trim panel: start by detaching the trim molding between the black and g…

Other guides you may be interested in

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos