Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the speakers in the BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Speaker

In this tutorial we can see how to replace the speakers in the BMW 5 Series, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the door in which we will work and, with a plastic spatula, unclip the upper trim. Next, unscrew the screw that has just been released using a Torx T30 key, unclip the handle frame and unscrew the additional screw. At this point, we can separate the panel from the door, disconnect the various connectors, remove the speaker and install the replacement.

Posted on 23 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front door panel of the BMW 5 Series
How to remove the front door panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this short guide we will see the instructions for disassembling and replacing the front door panel of the BMW 5 Series. First, open the front door…
Instructions for Disassembling the Timing Chain on BMW 5 Series
Instructions for Disassembling the Timing Chain on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will learn how to disassemble and replace the timing chain on a BMW 5 Series. We will focus on the main steps. First, open and lift the ho…
How to disassemble the rear window of the BMW 5 Series
How to disassemble the rear window of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Today we will discover the main instructions on how to disassemble and replace the rear windshield of the BMW 5 Series. First, we open the rear tailg…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos