Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the front headlight of the BMW 5 Series

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Headlight

The following steps will show us how to disassemble and replace the front headlight and its bulbs of the BMW 5 Series. First, open the hood of the car and start by removing the plastic bulb protection cap, then disconnect the electrical connectors; then unscrew the fixing screws of the front headlight found on the top, in order to detach it and remove it, as shown in the video. At this point, if necessary, replace the optical group with the new one, replacing either the bulbs only; apply the reverse process for reassembly!

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Condensation from the Front Headlight of BMW 5 Series
How to Remove Condensation from the Front Headlight of BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see the instructions that will allow you to disassemble the front headlight and remove any condensation from the BMW 5 Series. First,…
Removing and Replacing the Front Headlight on BMW 5 Series
Removing and Replacing the Front Headlight on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Today's main instructions will show you how to remove and replace the front headlight on a BMW 5 Series in simple steps. First, open the hood of the …
How to disassemble and replace the front headlight and bulbs of the BMW 5 Series
How to disassemble and replace the front headlight and bulbs of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this guide we will see the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the BMW 5 Series. First…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos