Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : How do you replace the external handle of the BMW 5 Series?

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Handle
Operation: How do you replace the external handle of the BMW 5 Series?

In order to replace the external handle of the BMW 5 Series, you need to open the door so that you have access to its side. Here, you will be able to locate a hole with a fixing screw inside. This screw, located in this position, must be completely loosened so that the handle can be released. It can then be disengaged from its housing, also disconnecting the connector on the inside. In this way, it will be possible to connect the new handle by inserting it into its seat and securing it with the side screw.


Posted on 9 November 2023 by ScegliAuto



Disassemble and disassemble the external handle of a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Let's see how to disassemble and disassemble the external handle on the rear door of a BMW 5 Series. Insert a special metal key in the slot on the do
How do you replace the external rearview mirror of the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In order to replace the external rearview mirror of the BMW 5 Series, you need to first remove the door panel: to do this, you will need to pry it wi
How do you replace the interior door handle on the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In order to replace the interior handle of the BMW 5 Series, the corresponding door panel must be completely disassembled: to do this, it will be nec

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos