Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Handle of the BMW 5 Series?

Model: BMW Serie 5 G30 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Handle

See other generations:
Video tutorial

To replace the exhaust of the BMW 5 Series, open the door to detach the circular rubber grommet located on the inside of the door. Under this grommet, you will find the fastening screw, which must be loosened to extract one end of the handle.

The other end can now be pulled out of its housing, allowing the connector attached to it to be removed. This connector should be connected to the new handle, so that the new handle can be inserted into its seat and secured with the appropriate side screw.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Remove and Install the Exterior Handle on a BMW 5 Series
Remove and Install the Exterior Handle on a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Let's see how to remove and install the exterior handle located on the rear door of a BMW 5 Series. Insert a special metal key into the slot on the d…
How to replace the driver side door handle of the BMW 5 Series
How to replace the driver side door handle of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today we will explain how to replace the driver side door handle on a BMW 5 Series F10 model. Before proceeding with the handle replacement, we need …
How to Replace the Interior Handle on a BMW 5 Series?
How to Replace the Interior Handle on a BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To replace the interior handle on a BMW 5 Series, you need to completely remove the corresponding door panel: to do this, you must detach the cover l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos