Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Polishing Interior Trim

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Dashboard

If the interior trim covering the dashboard and door panels looks dull and aged, you can restore its shine by polishing it with a special wax (carnauba-based wax is recommended: it is derived from the leaves of a palm tree); protect the surrounding plastic area with masking tape, apply the wax with cotton balls using circular motions until the surface is evenly opaque; wait a few minutes and remove the wax with a microfiber cloth; repeat the steps if necessary.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Polishing the Front Headlight
Instructions for Polishing the Front Headlight
BMW Serie 5 (1995-2003 / E39) Front headlights often become cloudy due to weather, especially from the sun, as well as chemical agents from car washes; however, it is possible to …
Carburetor and Intake Manifold Polishing
Carburetor and Intake Manifold Polishing
BMW Serie 5 (1995-2003 / E39) A perfect polish of the internal body of the carburetor and the corresponding intake manifold will make the surface so smooth that it minimizes frict…
Removing Trim and Molding from the Body
Removing Trim and Molding from the Body
BMW Serie 5 (1995-2003 / E39) In some cases, for body repairs or interior coverings, it is advisable to remove seals, trim, or molding along the body. These moldings are mostly sn…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos