Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

Replacing the battery in a BMW 3 Series, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure that the key is not in the ignition for safety.

Start by opening the trunk, then remove the panel located on the right side, just behind the taillight. Next, remove the two mounting bolts using a 10mm socket wrench, disconnect both terminals starting with the negative, and take the battery out of the housing.

To install the replacement, simply follow the reverse procedure.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How do you replace the battery in the BMW 3 Series?
How do you replace the battery in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To replace the battery installed on the BMW 3 Series, you need to open the rear hatch: here you will be able to locate the pins that secure the carpe…
How to Replace the Battery in a BMW 3 Series
How to Replace the Battery in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these instructions to remove and replace the battery in a BMW 3 Series in simple and quick steps. First, locate the battery, which is found in…
How to Replace the Key Battery on a BMW 3 Series E90
How to Replace the Key Battery on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) If the key for your BMW 3 Series E90 (2005-2013) has stopped working and you want to know how to replace the battery, follow these steps carefully. F…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos