|
Do it yourself
| |||
| ||||
Replacing Automotive Coolant
Model: BMW Serie 7
E66, E67, E68, E65, MK 4
- Years 2001-2008
Maintaining your car is essential. Sometimes, certain tasks are overlooked by car owners. One of these can be replacing the coolant, which prevents excessive heat generated by the engine from overheating various components of the vehicle. Therefore, it is necessary to change it to avoid overheating. The following guide shows how to do it. Open the hood and remove the cap from the expansion tank to speed up the draining of the old fluid and the drain plug located at the bottom of the radiator. Place a container underneath to collect the old fluid. Once the system is completely drained, screw the drain plug back in, open the bleed valve, and pour the coolant into the radiator from the expansion tank. Then start the car to ensure the operation was successful.
Updated on 19 February 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 7
(1986-1994 /
MK 2, MK 3, E32, E38)
First, perform this repair with the engine cold to avoid burns.
The radiator is simply attached to the front grille with snap fasteners.
Remove the c…
BMW Serie 7
(2015-2022 /
MK 6, G11, G12)
In this tutorial, you will see how to reset the brake fluid light in a BMW 7 Series, a very simple and quick operation that should only be performed …
BMW Serie 7
(2001-2008 /
E66, E67, E68, E65, MK 4)
This guide shows how to change the cooling fan in your car. First, completely drain the car's cooling system by letting the fluid out of the radiator…
Other guides you may be interested in
|
How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI
Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |