Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster of a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Instrument cluster

See other generations:
Video tutorial

In this short video tutorial, see the steps necessary to replace the instrument cluster of a BMW 3 Series, model E90, E91, E92, and E93. Perform the entire procedure with the vehicle off. To remove the instrument cluster, first, remove the two screws holding it in place located above it; you will need a T10 Torx wrench for this.

Once done, carefully pull the instrument cluster out of its housing, and after extracting it, disconnect the wiring located behind it to remove it completely.

Finally, follow the procedure in reverse to install a new instrument cluster.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster on BMW 3 Series
How to Remove the Instrument Cluster on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the instrument cluster to replace the LEDs in the BMW 3 Series? Let's carefully see in this video how to proceed with the correct d…
How to Replace the Instrument Cluster Lights on a BMW 3 Series
How to Replace the Instrument Cluster Lights on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide will show you how to disassemble and replace the bulbs in the instrument cluster of the BMW 3 Series, following the instructions bel…
How to disassemble the instrument panel of the BMW 3 Series
How to disassemble the instrument panel of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The following steps will show us how to disassemble and replace the instrument cluster of the BMW 3 Series dashboard. First, we get into the car and …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos