Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Parking Sensor Control Unit Located in the BMW 1 Series?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Parking sensors

In this video, you will see where the parking sensor control unit is located in the BMW 1 Series, useful in case you need to replace it due to a fault. As shown, the control unit is found inside the boot, specifically in the lower right area just behind the headlamp. To access it, simply open the tailgate, remove the lower edge cover, and take out both the floor panel and any storage basket. To replace the control unit, just disconnect the relevant connectors and unscrew the fastening bolts.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Parking Sensors of the BMW 1 Series
How to Clean the Parking Sensors of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Briefly, we will see the instructions that will allow you to effectively clean the parking sensors of the BMW 1 Series; the procedure applies to all …
Guide to Replacing the Parking Sensors on a BMW 1 Series
Guide to Replacing the Parking Sensors on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide provides instructions for removing and replacing the parking sensors on a BMW 1 Series, following these simple steps. First, move to the r…
Where are the Fuses on a BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Each fuse in the BMW 1 Series is located within one of the dedicated fuse boxes installed in the vehicle. In this type of car, you will find two fuse…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos